G-Tools Bonanza Klima Grow Cabinet Table Model 0.35 m2
Robust mini grow box
The Bench model is the smallest grow cabinet in our range. This mini grow box has the dimensions of a large refrigerator and is easy to put away in an unused corner of your home. The cabinet is suitable for growing 1 to 5 plants in pots with soil. Ideal for those who want a fun hobby but have limited space. With the Bonanza Bench model, you can grow your favorite plants at home all year round, safely and productively!
Solid construction
The indestructible shell of the Bonanza Bench model cabinet consists of aluminum profiles, plastic insert connectors, and PVC/XPS sandwich plates. Together they form an extremely solid construction that guarantees a lifetime of hassle-free growing. The sandwich panels are designed by us and have great light-reflecting, heat, and sound insulating capacities. Its sleek appearance owes the cabinet to the door, which is made of a solid 3mm PVC panel with an aluminum top layer. This swing door with locks not only denies access to the curious but also allows easy access to your plants. This makes the Bonanza grow box suitable for use in any interior.
Extractor, filter and silencer in 1
To remove warm air from the cabinet, the Bench model is equipped with a compact fan, filter, silencer set. The G-tools mini air extractor of this set has sufficient capacity for cooling lighting systems up to 250 Watts. The extractor is mounted directly on a PK K2600 carbon filter. The air is therefore first drawn through the filter and cleaned of unwanted smells before it is blown out of the cabinet. Because the air extractor is mounted inside a special silencer, the noise of the outgoing airflow is kept to a minimum. 45Db with closed doors at a 1-meter distance. With continuous use, the carbon filter will be saturated after about a year and must be replaced. This is very easy to do yourself. On our youtube channel, you will find a demonstration film on how to do this. You will find the filter and the extra-long cable ties for installation in our webshop.
G-tools air inlets
When the air extractor is running and the door is closed, negative pressure is created and unfiltered air cannot escape from the cabinet. Due to the negative pressure, fresh, CO2-rich air is continuously drawn into the cabinet via 3 G tools air inlets. These inlets are installed at the bottom of the back wall of the cabinet and function as a labyrinth that lets air in but no light out. The filter, the point where the air is drawn in, is located at the front of the ceiling. The air is thus drawn through the box diagonally, past the plants, before it is filtered and blown out smell-free. The cabinet can blow out directly in the room where it is placed. The Bonanza 0.35 model grow box does not need to be connected to any duct that has to be led outside.
Wi-Fi Smart Box
A Wifi Smartbox is mounted on the ceiling of the cabinet. This distribution box has four sockets for the electrical equipment in the grow box. Two of these contacts have continuous voltage, one of which is used for the air extractor. The other two contacts can be programmed via a free downloadable app and can be used to control the lighting and an irrigation system. When the app is installed on your smartphone, you can set the times at which the lamp and pump switch on and off from anywhere in the world If there’s no WiFi signal where the cabinet will be placed, you can manually switch on these two contacts permanently and use an analog time clock.
Fixing points for the lighting
Bonanza Clima cabinets are supplied without grow light. There are, however, two mounting points for a lamp mounted in the ceiling. With the supplied “Light Hanger” pulley set, you can adjust the lamp in height and always maintain the perfect distance to the plants.
