G Tools Bonanza G-bars 150 Watt LED Mini Grow Cabinet 0.35m2
Fully equipped grow cabinet with 150 Watt G-bars LED lights - 176x61x61cm
The G-Bars grow cabinet is instantly ready for use upon arrival, just plug the grow cabinet in and you can get started. Like the other grow cabinets of the Bonanza line, this model has a mini fan / filter mounted in a silencer. This fan and filter ensure a sound-free and odorless removal of warm air from the cabinet. With continuous use, the odor filter lasts about 1 year, after which it is replaced easily and for a low price.
When the extractor fan is running, underpressure is formed in the cabinet. As a result, air is drawn into the cabinet from the outside. The fresh and CO2-rich air comes in via 3 G-tools air inlets. Through these inlets the air can enter but the light is not able to exit the cabinet. The only way out is through the extractor and the carbon filter. Therefore, all the air that exits the cabinet is filtered, thus prevents any undesired odor.
Short instructional video for setting up the G-tools Bonanza mini grow cabinet.
G-Bars 150 watt LED grow light
This cabinet differentiates itself from the other Bonanza 0.35 m2 models by the G-Bars 150 Watt LED grow light.
The best light distribution over the growing surface is obtained by working with beams or "bars". The LEDs are mounted on aluminum extrusion profiles that are mounted on a frame. The bars with the frame are almost as large as the growing surface of the cabinet. The entire breeding surface is thus illuminated equally. Equal light values are now measured down to the farthest corners of the cabinet. This prevents plants farther from the lamp being left behind.
The LEDs are therefore relatively far apart from each other. Together with the large angle at which the light is emitted, it allows for the bars to be hung very close to the plants. Because of this, there is no "transport loss" and optimal efficiency of the lamp can be achieved.
The lamps are supplied with a suspension set that allows the lamp to be continuously adjusted in height. In this way you can always maintain a minimum distance to the emerging crop.
Special irrigation systems are built for these cabinets. An automatic irrigation system that can be used both as a drip system and as an ebb & flow system. This system is very suitable for growing plants in pots with soil.
In addition, one can choose to work with a Flow & Grow system completely medium-free. Here the plants are placed in baskets and the roots are suspended in a container through which a layer of water with nutrients is continuously pumped.
The use of an irrigation system not only gives you the freedom to be away from home a little longer, but also increases the yields.
G-Tools Mini Grow Cabinet with G-Bars 150 watt LED grow light. Ideal for growing one to five plants in pots with soil. Compact and affordable!